Barracuda

Two different super detailed 1/48 scale wicker seats as fitted to many WWI British aircraft. Sopwith Camel, Pup, Triplane, S.E.5a, DH.2, R.E.8, and more. Master patterns by Michael O'Hare...

This set contains parts to make a super detailed 10?4? diameter prop w tapered blades, as fitted to many Spitfire Mk. XIXs, XIVs and XVIIIs. There were 2 styles of blades, a wide blade and a later tapered blade seen on most Spit XIXs in service. Designed for the gorgeous Airfix Spitfire XIX, but can..

This set contains a seamless one-piece upper cowling for the Eduard Spitfire Mk. IX and Mk.VIII kit. The kit cowling is molded in two parts. A simple, one piece, drop-fit replacement part that helps you get on to the fun part. Also perfect for conversions to Mks VII, X and XI...

This set contains highly accurate and detailed replacement resin parts for the cockpit door, gunsight, stick, throttle and retract quadrants, seat with molded-in belts, and other detail parts. Also included is a sheet of cockpit stencil decals. It is designed to install quickly and easily in the Edu..

This stick is suitable for every Spitfire from The Mk Vb on through the Seafire FR 47. The spade grip features the rectangular housing for the 3 position trigger switch, and a molded on brake lever.This control column is offered in 3 versions. With and without gun camera button and a third versi..

This is for Spitfire Mk Is and Vs fitted with machine guns only. If it has an eight gun A wing, this is the set for you. The spade grip features the round housing for the trigger, as well as an attached brake lever.This control column is offered in 3 versions. With and without gun camera button ..

This set contains six super detailed, 3D printed 3-inch rockets and rails, as carried by Sea Furies and other a/c. The rockets and rails are printed as one piece and the folded metal clips that hold the rocket to the rail are not molded solid, but accurately represent the open gaps in the clips. The..

This set consists of a new engine front with much improved detail, and a new correctly shaped spinner for the 1/48th Airfix Sea Fury. The kit spinner is too blunt. The parts are designed to be a drop fit replacement for the kit parts, though we highly recommend using this set in conjunction with our..

This set consists of a pair of Sea Fury main wheels with staggered block tread. This style was seen very commonly on Sea Furies during the Korean conflict and serving with foreign air forces. The hubs are beautifully detailed and the tyres are complete with fine beading and readable tire data. Separ..

This set contains four super detailed, 3D printed 2-tier rockets and rails, as carried by Sea Furies and other a/c (8 rockets in 4 pairs). The rockets and rails are printed as one piece and the folded metal clips that hold the rocket to the rail are not molded solid, but accurately represent the ope..

This set contains eight highly detailed and accurate 3D printed 250 pound small bomb containers. They are loaded with 4 lb incendiary stick bombs, as fitted to many RAF bombers in WWII. These containers were delivered to the aircraft preloaded to speed the process of bombing up. A full load for a L..

This set contains eight highly detailed and accurate 3D printed 250 pound small bomb containers. Each container is loaded with eight 30 pound bombs, as fitted to many RAF bombers in WWII. These containers were delivered to the aircraft preloaded, to speed the process of bombing up. A full load for..

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. A mass of tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank release handle. Instrument faces are not included, b..

Two highly detailed and accurate mainwheels with oval pattern tires and see through hubs make up this set. A quick and easy upgrade for A-36 and P-51A, B, C, D, and K model Mustangs. You can see daylight through real Mustang wheel hubs. Now you can recreate this in 1/48th scale...

This set contains a pair of accurate 3D printed mainwheels with diamond tread tires, complete with period accurate logo and tire data. The hubs are printed separately to preserve the see-through effect of the real wheel hub. Two rear hub styles are supplied, allowing these wheels to be fitted to P-5..

This set contains a pair of accurate 3D printed mainwheels with block tread tires, complete with period accurate logo and tire data. The hubs are printed separately to preserve the see-through effect of the real wheel hub. Two rear hub styles are supplied, allowing these wheels to be fitted to P-51 ..

"Kansas Tornado II" P-47D-25-RE, serial number 42-26742. 510th FS, 405 FG, 9th Air Force. Flown by Capt. Howard Curran. Based at St. Dizier, France, Fall, 1944. Natural metal finish with dark blue nose ring and canopy frames. Note cutback cowl flaps and Curtiss Electric 13' paddle bladed propeller."..

This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for for the Airfix, Monogram, Trumpeter and Bronco kits...

Contains a new cockpit floor and rear bulkhead, featuring a super detailed seat with accurate and naturally draped molded-in seat belts. If you struggle with bending and gluing down etched seatbelts, trying to make them look natural, only to have them look a bit two-dimensional, this is a simple and..

Contains 4 pairs of accurate and detailed 3D printed aileron mass balances. Balances are cast in a strong resin to reduce the chances of breakage. They require much less cleanup and have detail that no kit parts have. Also useful to replace lost or broken kit parts on finished models. Can be fitted..

This set consists of a pair of accurate resin mainwheels featuring super detailed spoked hubs, subtly ribbed tires and readable logo and data as fitted to the Bf 109E and F series aircraft. a nice upgrade for all 1/48 Me/Bf 109E and F kits...

This thoroughly researched and super detailed cockpit set is designed for the 1/48th Hasegawa Bubbletop Typhoon kits. It consists of a complete resin cockpit with a photoetched instrument panel with very detailed, readable film dials and a number of other small etched details. The seat has a molded ..

This set contains a new detailed de Havilland 4 blade spinner with smaller & accurately shaped blade openings to replace the kit spinner in the Series I and Series II kits. new tool Eduard Tempest V. Can be modified for use on other other Tempest and Typhoon kits...

This set contains one accurate, detailed resin seat complete with quilted backpad and naturally draped molded-in late war Sutton quick-release style harness for easy painting. Designed as a drop fit replacement for new tool Eduard kit, but can be easily made to work with older kits as well...