Barracuda

This complete resin cockpit set replaces the kit interior. It corrects the much too narrow side consoles in the kit cockpit, and supplies you with the missing gunsight and compass, as well as their mounting brackets. Our cockpit features a whole range of accurate details not in the kit. Features a r..

..

This set consists of a pair of postwar tread (circumferential ribs with side diamonds) mainwheels as fitted to many postwar F4U-4, -5, and AU-1 aircraft, as well as being a common fit on -1 and -1A model postwar Corsairs. Accurate resin cast mainwheels with logos and tire data are finished off with ..

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and the set includes new instrument faces for the instrument panel, a few cockpit placards and even some decals for the radios. Printed by Cartograf, the..

Designed to replace the kit lower sidewall for the Tamiya Spitfire VIII, IX, and XVI. This set also includes the missing remote contactor. The new resin sidewall has been molded with all the complex plumbing of the windscreen de-icer system, as well as the oxygen line. A number of other details have..

This set consists of a super detailed Bf 109G type seatpan and rear bulkhead with molded in harness to replace kit seat in Revell Germany's 109G kits. The accurate molded in harness has strong relief and great detail, making it easy to paint. For those of you who don't enjoy fiddling with tiny brass..

This set contains a new resin prop and spinner to replace the kit items in the Revell kit. Barracuda resin spinner is more accurate in shape and detail. The misshapen kit blades are replaced with very accurate resin versions which will make a big improvement in the look of your finished model. Easy ..

This set consists of a pair of super detailed, accurate resin mainwheels as fitted to some Bf 109G-10 and most K-4 series aircraft. These wheels represent the the wide, smooth tire fitted to the plain, ribless hub. Finely rendered raised tire data is featured. Will upgrade any 1/32nd Bf 109G-10 and ..

This set consists of a pair of super detailed, accurate resin mainwheels as fitted to the Bf 109G-5 through G-14 series aircraft. These wheels represent the later fit of the plain tire fitted to the plain, ribless hub. Finely rendered raised tire data is featured. Will upgrade any 1/32nd Bf 109G kit..

This set contains accurate resin main wheels with staggered block tires, detailed hubs, and fine tire beading. Block tread tires were common among post war Lancasters. They are not appropriate for wartime aircraft, unless you just like the look better. This set also corrects some noticeable errors w..

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a superdetailed wheel hubs with separate uplock lugs. Designed to replace the sometimes poor wheels found in 1/32 Hurricane kits. A fast and easy upgrade for kits by Fly and Pacific Coast..

These resin wheels represent the late, dual brake style wheel fitted to all but the early B. Mk IVs and NF Iis. The detailed and accurate tread pattern wheels with hub detail and tire data...

This set contains parts to correct the rear of the kit nacelles and inner wing root, as well as accurate exhausts with separate flame holders and super detailed afterburners nozzles. It also includes separate radius rods (with many spares), guide vanes and APU exhaust ducts. A huge detail upgrade fo..

This set contains a pair of accurate resin mainwheels with ribbed tires (seen on all 190s until the last few months of the war), solid wheel hubs and detailed tire logo and data. For all later Fw 190A/F and Dora series kits. Simple one piece castings means no fussy assembly...

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and the set includes new instrument faces for the instrument panel, a few cockpit placards and even some decals for the radios. Printed by Cartograf, the..

Very little modification of the kit parts is needed to install the 27 tiny parts in this set. Cockpit door, retract quadrant, 2 types of throttle, 2 types of gunsight, two types of seatbelts molded into the seat castings and a host of other small parts are supported by a new film dial sheet with muc..

Accurate resin hexagonal tread pattern tires with see-through hubs replace the kit wheels in any 1/48 kit of the A-36 and P-51A, B, C, D and K variants. You can see daylight through real Mustang wheel hubs...

This set consists of a pair of super detailed, accurate mainwheels as fitted to Series 1 Tempest Mk. Vs. The wheels feature subtle tire beading, logo and size data, as well as accurate front and rear hubs. Designed as a direct replacement for the kit wheels, this is a fast and easy upgrade...

Super detailed, accurate resin mainwheels as fitted to many 109G-10 and all K-4 aircraft. these are the wheels with wider tires that necessitate the large wide wheel fairing on the upperwings of later G-10s and all K-4s. Also fitted as mainwheels to the He-162. For Eduard, Hasegawa, Revell, and Fuji..

This set contains nearly 50 tiny stencil markings that replicate nearly all of the markings found in the wartime F4U-1, -1A and -1D Corsair cockpits. These markings will really bring the cockpit to life. Not for the faint of heart, but the hours you spend adding these tiny decals will be time well s..

This set consists of new resin main wheels for Ta-152H and some later production Ta-152Cs. They feature detailed tires with fine tire beading, logo and data, and accurate hub detail with mounting points for the front hub brake cable, which is supplied as fine black wire. A big and easy detail upgrad..

This set contains an accurate standard Spitfire seat with detailed back pad and armor plate (missing in the Revell kit) to replace the inaccurate seat with its modern upholstered back pad in Revell's Mk IIa kit...

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. Over 100 tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank release handle. Instrument faces are not included, bu..

"Angie" P-47D-27-RE, serial number 42-26860 512th FS, 406th FG, 9th Air Force. Flown by Col. Anthony Grosetta. Based at Asch, Belgium, early 1945. Natural metal with yellow trim and Polished OD (not black) tailplanes. Note Curtiss Electric 13" paddle bladed propeller and lighter blue stripe on tail...