Decalcas

Emergency button in 1/24 scale, which reproduces those used in modern competition vehicles for the electrical cut-off and activation of the extinguishing system, so you can use them in your scale models. 20 3D printed push buttons are included, as well as a decal sheet with the electrical cut-off an..

Dzus type quick release fasteners with large rhomboid base (Type 2) at 1/24 scale, with a width of 1,82 mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.6 mm diameter support rod for mounting, which will allow you to..

Dzus type quick release fasteners with rhomboid base (Type 1) at 1/24 scale, with a width of 1,54 mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.6 mm diameter support rod for mounting, which will allow you to fix t..

Set of FOUR rims and TWO light focuses. Includes rims, nuts, air valves, and light focuses.Family: Rims Scale: 1/24 Reference: DCL-PAR004 Item: Conrero set up 2: Rally rims 15 inches + lights Includes: resin parts To be used with: Belkits references BEL008, BEL-008, BEL009 and BEL-009, or Decalcas..

Guaranteed quality when painting the windows of Heller's Citroen DS3 WRC kit with the pre-cut masks from Decalcas. Includes masks for the windows and front and rear windscreens. A complete success! Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK025 Item: Citroen DS3 WRC - Win..

Set of masks to accurately paint all the windscreen and windows of the different references of the Nunu / Beemax / Aoshima model of the Chevrolet Cruze 1.6T.Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK015 Item: Chevrolet Cruze 1.6T Includes: paint masks To be used with: ..

Hexagon central nuts and axles for single-nut BBS type rims, made in 1:24 scale and manufactured by 3D printing. Give your model an extra dose of realism with these nuts and axles that take every detail to the extreme, allowing the possibility of adapting them to your design by presenting the axle a..

Brake caliper bleeders at 1/24 scale. Made in resin using 3D printing, they reproduce all the details, and come in two configurations, with and without rubber protector, so you can give even more realism to the brake calipers of your scale models. With the usual quality of DECALCAS products, you onl..

Set of paint masks and decals for detailing the windows of the 2019 BMW M8 GTE scale model kit by Nunu. The set includes paint masks to paint the window frames and decals that recreate the carbon fiber patterns of both the window frames and the air intakes to the tailgate. With this set you can add ..

Set of BBS rims with Pilot Sport tires, along with inflation valves and the corresponding axles, for updating the wheels and tires of the BMW M8 GTE scale model by Nunu.Family: Rims and tyres set Scale: 1/24 Reference: DCL-PAR062 Item: BMW M8 GTE - BBS rim + Michelin tyres Includes: paint masks, r..

Paint masks for all windows.Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK005 Item: BMW M6 GT3 Includes: paint masks and assembly instructions To be used with: Nunu references PN24001, PN24003, PN24008, NU-24008, PN24027 and NU24027..

The Turner Motorsport team participated in the 24 Hours of Daytona of last year 2019 with a beautiful BMW M6 GT3 whose decoration fascinated us and we have reproduced it to the maximum possible detail.Status: Production ending (remaining stock) Family: Marking / livery Scale: 1/24 Reference: DCL-D..

Paint masks for all windows.Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK001 Item: BMW M3 E30 Includes: paint masks and assembly instructions To be used with: Beemax Model Kits references B24007, Aoshima 098196, B24016, B24019 and BX24029, or Nunu references PN24014, PN-2..

Complete decoration to make the "green" version of the BMW M3 sponsored by Tic Tac in the German DTM Championship in 1992. The set is composed of a sheet of decals and a sheet of pre-cut paint mask.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC006 Item: BMW M3 E30 Team: Valier Motorsport ..

The Tic Tac-sponsored 1991 BMW M3 from Tauber Motorsports was driven in many of the DTM's 12-race season by Canadian Allen Berg. It finished 25th in the 1991 season.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC005 Item: BMW M3 E30 Team: Tauber Sponsor: Tic Tac Number: 43 Drivers: Allen B..

Spanish Rally Championship winner in 1991Family: Marking / livery Scale: 1/24 Reference: DCL-DEC002 Item: BMW M3 E30 Team: Sauermann Competicion Sponsor: Camel Number: 1, 2, 3, 10 Drivers: Jose Maria Ponce + Leon Gaspar , Jose Maria Ponce + Jose Carlos Deniz Race: El Corte Ingles Rally Islas Ca..

Motorbike legend and Grand Prix World Champion, Wayne Gardner participates at the last event of the DTM season on October 11th, 1992.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC004 Item: BMW M3 E30 Team: Linder Motorsport Sponsor: Jagermeister Number: 19, 20 Drivers: Armin Hahne , Wayne..

Australian Touring Car Championship winner in 1987Family: Marking / livery Scale: 1/24 Reference: DCL-DEC003 Item: BMW M3 E30 Team: JPS Sponsor: John Player & Sons Number: 3, 44 Drivers: Jim Richards + Tony Longhurst Race: 12 hours Bathurst, ATCC Australian Touring Car Championship 1987 Includes..

Two budding stars such as Luis Perez-Sala and Olivier Grouillard (not in vain, both would be part of the Formula 1 grid in 1988 and 1989 respectively) got behind the wheel of the agile BMW M3 E30 of the Bigazzi team in the 4 Hours of Jarama 1987, a valid race for the World Touring Car Championship, ..

The BMW M3 car sponsored by Alpina Team took part in many of the 1988 DTM season races. Family: Marking / livery Scale: 1/24 Reference: DCL-DEC007 Item: BMW M3 E30 Team: Alpina Number: 22, 23 Drivers: Christian Danner + Peter Oberndorfer Race: DTM 1988 Includes: water slide decals and assembly ins..

According to what is said, it took a while for Pep Bassas to get the quintessence of the M3, but through work and method, he managed to become one of the fastest drivers in Spain... so much so that in 1988 he became the Carlos Sainz's main rival for the Spanish Rally Championship, and in 1989, alrea..

Decalcas: Marking / livery 1/24 scale - BMW M3 E30 Group A #3 - Josep..

When we saw this product, the first thing we thought was... finally! And there are certain parts of the BMW M1 kit from Italeri, Revell or Esci that show the passage of time, such as the wheels and tires. And in addition to improving its design, the spectacular turbofans used in numerous versions ar..

This pre-cut repositionable low-adhesion paint mask fits perfectly on the BBS rims and tires designed by Decalcas for the BMW M1. But calm down. You do not need to buy this reference if your idea is to get a unit of the wheel set from Decalcas for the BMW M1, since the masks are included... but who ..