Flying Leathernecks

This set includes six (6) buckets that can be used in a diorama setting (ordnance loading evolution) or to replace kit parts...

Cut in holographic vinyl to replicate the windows on the seeker head of the pod. Simply peel and stick after pod has been painted, decaled and weathered. Enough pieces for six pods are included...

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the stowed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Left Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, AV-8B and EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

Cut in holographic vinyl to replicate the windows on the seeker head of the pod. Simply peel and stick after pod has been painted, decaled and weathered. Enough pieces for six pods are included...

This set includes fifteen (15) total air temperature probes used on a variety of aircraft.Designed by Craig Sargent..

This set includes the FLIR, TV and LDT windows for the TSS turret of the Kittyhawk AH-1Z. The window configuration is incorrect. Simply assemble turret, sand smooth and paint 36375. Once dry, apply vinyl pieces as shown in the instructions to replicate the windows more accurately...

Waterslide Decals printed by Microscale (Insert printed by Cartograf). 5.5 x 8.5 inch sheet..

Vinyl Mask..

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Kittyhawk kits..

Vinyl Mask..

This set includes two (2) AGM-123 Skipper anti-ship laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fins in the ..

This set includes two (2) thermally protected AGM-123 Skipper anti-ship laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes ..

The AERO-3B missile launcher was designed to be used with the AIM-9B Sidewinder missile.This set includes 4 launchers with standoff adapters designed to be used on the Zoukei-Mura F-4C/D/E.Each launcher is 3D printed and come removed from the print supports. All that is needed is a light sandin..

This set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station...

This set contains two (2) fuel tanks with print supports attached. Use a fine tip sprue cutter to remove supports from the tank. Do not 'break' the supports free, as this can damage the surface of the tank. We have intentionally provided a photo of the tank with the supports removed in this fashion,..

3D ResinThis set includes two (2) AERO-1D 300 gallon fuel tanks with the four fin tail. Each tank is made up of four parts. Some light sanding will be needed to remove the small nibs from the print supports.Like most of our items, parts are removed from the print supports prior to curing and packa..

3D ResinThis set includes two (2) AERO-1D 300 gallon fuel tanks with the finless tail. Each tank is made up of two parts. Some light sanding will be needed to remove the small nibs from the print supports.Like most of our items, parts are removed from the print supports prior to curing and packagi..

Simple to use pre-cut vinyl canopy and wheel mask for the Hobbyboss TA-7C and A-7K kits...

Designed for the Hobbyboss series of kits, enough for one aircraft...

This set includes a holographic vinyl piece for the TRAM pod windows...

Vinyl Mask..

Vinyl Mask..