Military Vehicles & Tanks

..

..

14x Complete 3D-Printed Resin 1/16 wheels (6 inner & 8 outer) 2x 3D-Printed Resin 1/16 spare wheels (outer) 3x sets of 14 wheel caps (3 types) 1x QuickWheel painting mask for drive sprocketWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16003The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16004The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16005The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16007The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16001The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

..

Mounted on single strapped frame (x 6 pcs)3D printed resin. Comes on printing supports which need to remove..

3D printed resin. Comes on printing supports which need to remove..

*Note: The set does NOT include any armour kit...

..

3D printed resin. Comes on printing supports which need to remove. Includes x 2 types of movable towing pintles..

3D printed resin. Comes on printing supports which need to remove..

Products made in 3D by SBS are not assembled or painted, and there may be colour differences depending on the resin.Comes on printing supports which need to remove #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

This is an upgrade set, model kit is not included.The set contains 3D printed track links removed from support, ready to build. Includes resin pins. (90 pcs)..

The set contains 2 cast resin wheels & 2 types of hubcap...

Products made in 3D by SBS are not assembled or painted, and there may be colour differences depending on the resin.Comes on printing supports which need to remove #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

3D printed resin. Comes on printing supports which need to remove..

3D printed resin. Comes on printing supports which need to remove..

The MX-6707/VRC Antenna mast base was part of the AS-1729 Vehicular Antenna, generally mounting a VHF antenna. The antenna base was commonly known as part of the VIC1 vehicle harness in Australian service. These antenna-based were used on numerous Australian and Western vehicles. The Australian vehi..

x10 Australian Modern-era 7.62mm/.30 Cal ammunition boxes Can be used for most variants of the M113 family, Centurion, Leopard AS1, ASLAV Type 1 and 3, M1A1, PMV-M (Bushmaster), SASR LRPV, CDO SRV-SF, and in the ground role. Can be used as extra stowage on variety of vehicles from the 1960s to curr..

x5 Australian Modern-era 25mm ammunition boxes. Can be used for ASLAV-25 Type 1. Can be used as extra stowage as seen on a variety of vehicles in the modern era...