Military Vehicles & Tanks

The effect of using this upgrade set is shown in the photo(s).Please note that the tank in photo(s) is just for display but NOT included in this set...

The effect of using this upgrade set is shown in the photo(s). Please note that the vehicle in photo(s) is just for display but NOT included in this set...

Kit contains 33 resin parts, metal sheet with photoetched parts and decals Covering..

Type : Masks for painting wheelsHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to t..

Type : Masks for painting wheelsHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to t..

2 insignia masks + wheels Type : Paint MaskSuper Mask Series - contain masks for painting cabins and stencils for distinctive paintings based on photos and other primary sources. Super Mask series also contains colour airplane drawings in four projections depicting the placement of the paintings. Th..

The finished result is shown in the photo(s).* Please note:1. The armoured vehicle in the photo(s) is just for display and NOT included in this set.2. The finished details on photo(s) may also be contributed by other upgrade sets from Voyager, please check the photos for more information (written on..

5 x Photo-etched part4 x Metal part1 x Mud Guard1 x Metal chain1 x Plastic Rod (0.8mm / 1.0mm)1 x PVC Tube (0.9mm / 1.3mm)2 x Manual (A3 size)Please note that the model kit in photos are just for display, but NOT included in this set...

This is an etching upgrade set, model kit is not included.The set contains 4x photo-etched sheets, metal wire and textile string...

This is an etching upgrade set, model kit is not included.The set contains 3x photo-etched sheets, metal wire and textile string...

Seven different sizes and styles. 8cm - 35 cm.Arabic numerals #1. BLACK 0-9.How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set th..

The finished result is shown in the photo(s). * Please note: 1. The armoured vehicle in the photo(s) is just for display and NOT included in this set. 2. The finished details on photo(s) may also be contributed by other upgrade sets from Voyager, please check the photos for more information (written..

This set is for for DRAGON 6511 / TAMIYA 35190. The finished result is shown in the photo(s).* Please note: 1. The armoured vehicle in the photo(s) is just for display and NOT included in this set. 2. The finished details on photo(s) may also be contributed by other upgrade sets from Voyag..

NOTE: You will need Voyager set PEA295 and VBS0141 to achieve the result shown in the 2nd and 3rd photos...

Brand NewFor 1/35 Dragon Sd.Kfz.184 Ferdinand kitIncluding photo-etched sheets, copper tubes and cable, steel wire, ABS rod, clear plastic sheet, resin parts and metal parts..

Brand New For 1/35 Tamiya 35209 Including photo-etched sheets, copper tube and cable, steel wire, ABS rods, resin parts and metal parts..

Brand NewFor 1/35th WWII British Armoured Car Staghound Mk.I - TAMIYA kit 89770..

Brand NewFor the 1/35 IDF Sho't Centurion Mk.5, Mk.5/1 1967 (AFV Club #35159)Including 9 etched frets of different sizes and thickness, 8 parts in light cream resin, two short lengths of plastic rod and 12 brass smoke grenade tubesThe metal barrel shown in the illustrations is NOT included in this s..

Brand New For the 1/35 Dragon sFH-18 150mm Howitzer w/Limber (#6392) Including 2 large and 4 smaller etched frets, 2 brass 150mm HE rounds, 2 brass charge cases, 4 resin parts and lengths of 0.5mm and 1mm plastic rod, a length of 0.3mm steel wire and metal chain..

Brand NewFor 1/35 Dragon kits 6164/6299Including eight (8) photo-etched sheets, steel wire (0.3mm x 8cm) x1, ABS rod (1mm x 5cm) x1, ABS rod (0.5mm x 5cm) x3, and metal partsArmour skirts / AA armour / cleaning rod bin are NOT included in this set..

Brand NewFor 1/35 Dragon King Tiger kitsIncluding photo-etched sheets, copper cables, steel wire, ABS rods, resin parts and metal part..

..

Brand NewFor all 1/35 armour kits..

Brand New *The sample armour kit shown on illustrations is upgraded by NOT ONLY this set (PE35321) BUT ALSO other Voyager sets (PEA095, PEA096, PEA097, PEA116 & TE031)...