Model Cars

Fantastic set of four Abarth Cromodora CD68 wheels for the Tamiya Fiat 131, recreating the set used by many rally drivers on their vehicles. The rims are perfectly matched to the original tires included in the Tamiya kit, so no additional tires are required. Also includes inflation valves and nuts, ..

Pneumatic fittings for detailing the brake, cooling, fuel, and hydraulic systems of your scale models in various scales (1/12, 1/24, 1/20 ...). Made with the usual precision and realism of Decalcas, parts with different turning angles of the tube are included so that they can be perfectly adapted to..

Set of pneumatic fittings from the Decalcas "Paint & Go" range for detailing your models' brakes/cooling/fuel. systems in any scale, including variants for both straight and curved pieces with a 1.2mm diameter outlet. They are executed with the usual precision and realism found in Decalcas, resins p..

Set of pneumatic fittings from the Decalcas "Paint & Go" range for detailing your models' brakes/cooling/fuel... systems in any scale, including variants for both straight and curved pieces with a 1.2mm diameter outlet. They are executed with the usual precision and realism found in Decalcas, resins..

Black decal, featuring a very thick texture with a lot of personality and presence, designed for adding very noticeable roughness. It can even be used to simulate linear carbon fiber in 1/12 scale.Family: Decals Scale: 1/12 Additional scales: 1/9;1/8;1/6 Reference: DCL-PAT012 Item: Texturized patt..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems... of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducin..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducing. ..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems... of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducin..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC014 Item: Yamaha YZF-R1M Includes: vacuum formed parts To be used with: Tamiya references TAM14133, HC-14133 and TMY14133..

Tyre sidewall white chalk marking decals in 1/12 scale: An extensive decal sheet with a variety of white numbers and markings such as those commonly found on Formula 1 and GTs car tires. Includes inscriptions such as "practice", "set", "test" Family: Logotypes Scale: 1/12 Reference: DCL-LOG009 Item:..

Set of toggle switches with protection caps in 1/12 scale. Includes 20 switches in total, 10 with closed lids, and another 10 with open lids.Family: Detail Scale: 1/12 Reference: DCL-PAR019 Item: Toggle switch with guard Includes: resin parts Parts: 10 + 10 units..

Decals for the decoration of the Porsche 934 RSR used in the last championship race of the SCCA Trans-American Championship held in 1976 at the Canadian circuit of Trois-Rivieres, where George Follmer with the number #16 not only won the race, but also was crowned the winner of the championship. We ..

Complete wheel set including BBS rims with Pilot Sport tires in 1/24 scale, along with air valves and hubs with central nut to detail the Nunu Porsche 911 RSR GT3 Le Mans 2018 kit. This set allows you to replace the rims and tires of the kit, which lack detail and are out of scale. Decalcas has paid..

Set of bonnet latches in 1/12 scale. Includes a total of 8 closures made of resin and elastic rubber by 3D printing. The extreme detail with which these closures are designed and manufactured provide greater realism to the models, since the pieces can be attached allowing the mobility of the rubber ..

Yellow tyres marking for in 1/12 scale without varnish, with each "GoodYear" letter independently designed segment by segment, only for the most demanding modellers.Family: Logotypes Scale: 1/12 Reference: DCL-LOG006 Item: Good Year Eagle tyre marking set Includes: water slide decals..

Complete 1/12 scale chain gear drive set that includes 3 rear sprockets with different dimensions (35, 37 and 49 teeth), a 15-tooth front drive sprocket, 156 links, and different nuts and screws to detail the anchoring of the pinion and crown. Whether you are making a scratch motorcycle or want to i..

Pre-cut paint mask in repositionable, low-adhesion paper, that fits over the transparent parts and bodywork of Meng 1/12 scale kit of the Shelby American Team Ford GT40 Mk II. These masks, of a higher quality than those included in the model, will allow you, in addition to being able to paint the tr..

Decalcas: Marking / livery 1/12 scale - Tyrrell Ford 003 Tyrrell Racing Team sponsored by ELF #11 - Sir John Young..

Cable switch for fire extinguishing systems in 1/12 scale. It includes six 3D printed switches and decals with different logos for integrating the switch in your 1/12 scale models with full detail.Family: Detail Scale: 1/12 Reference: DCL-PAR063 Item: Fire Cable T Handle Includes: 3D printed parts..

Tyre marking for 80's F1 carsFamily: Logotypes Scale: 1/12 Reference: DCL-LOG003 Item: Goodyear tyre marking set 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989 Includes: water slide decals..

Brake caliper bleeders at 1/12 scale. Made in resin using 3D printing, they reproduce all the details, and come in two configurations, with and without rubber protector, so you can give even more realism to the brake calipers of your scale models. With the usual quality of DECALCAS products, you onl..

Pre-cut paint mask in repositionable low-adhesion paper, which fits on the body of the Italeri kit of the Bugatti Type 35B in 1/12 scale. These masks will allow you to paint correctly and precisely the color stripes and the numbers of the car instead of using the decal included in the kit.Family: ..

Guide bushings for use on 1/12 scale brake discs. Enhance the realism of your brake discs with these bushings, which come separated into two parts, one of the pieces being the flat T-shaped outer bushing and the other being the inner nut. Made of resin using 3D printing, they reproduce all the detai..

Decals for completing the instrument panel of the Tamiya Brabham Ford BT44B with better definition and detail. These decals include the complete dials, as well as all the indications, labels and stickers for the different buttons and switches. A message has even been added that could sometimes be se..