Model Planes

Tomahawks supplied to the RAF were Dark Green and Dark Earth. A mirror-image pattern was also applied during 1940. Unlike later larger production batches, the green and brown camouflage colours appear to have been applied without the use of masking mats. Very possibly some kind of template was used ..

After the 1st batch of P40's was dispatched to the RAF, Curtis began using plywood spray masks to speed up production. A batch of these aircraft was sent out to the AVG ("Flying Tigers") in China.See our other P-40 masks. The RAF Early was only used in the 1st batch. This mask is the correct mask ..

This standard camouflage pattern used Colours 70/71/65 and remained standard from 1940. Spinner and metal prop blades were the usual Colour 70. German national markings were remarkably consistent in size, style and placement.Aircraft that operated in North Africa were camouflaged in Colours 78/79/..

The operational scheme of the Typhoon remained fairly uniform while in service. Variations are seen mainly on the right side. We have provided several overlays for the modeller to accommodate these variations. In addition, there are 2 types of Wing insets to allow for a variation on this piece. Thes..

During 1940 two camouflage patterns were used; Type A for aircraft with serial numbers ending in even numbers and Type B for aircraft with serial numbers ending in odd numbers. During Mid 1941 only type A was used. See our mask TNM-M010 for Pattern A.We have tried to faithfully represent the schem..

The factory camouflage scheme was common to most production versions of the Dora series. Some early production examples were delivered with fuselage upper surfaces painted in RLM 75. Wing upper surfaces could also have been pained in RLM 75 or a combination of RLM 75 and RLM 2. Fuselage mottle was R..

While the factory camouflage scheme was common to most production versions of the Dora series, there is a lot of debate as to machines at the end of the war. 1945 was a difficult time for production and a lack of resources led to many variations. Field adaptations to keep aricraft servicble also led..

The F series saw the introduction of a new splinter pattern on the 109. This was also authorised for use on the G series. The early G2/4 series had identical patterns. We have produced both a pattern 1 and a pattern 2 to allow for the variations caused by production in different factories.Please s..

The Bf109G was manufactured at three different factories in Germany, each with a distinct style of camouflage that can often quite easily be identified with a little help from other distinguishing marks. Identifying which factory an aircraft stems from, will help pick the correct camouflage pattern ..

The full Balkenkreuz was slowly reduced as the war continued, the white area being more pronounced on the fuselage and lower wing.Please check your references for the particular model that you are building...

Supermarine Spitfire Mk l, K9938, SD-H of No 72 Squadron, RAF Church Fenton, North Yorkshire, August 1939...

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Set of self-adhesive masks for the E-2C Hawkeye aircraft model by Italeri (Kinetic) in scale 1/48...

Vivid and interesting surfaces within a snap. Set of 3 stencils. 6x6cm / 2x2 inches..

#NOTE: The set does NOT include a model kit...

..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

#NOTE: The set does NOT include a model kit...

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

#NOTE: The set does NOT include a model kit...

This product contains a die-cut flexible foil for masking a kit or section of a kit during the painting of a scale plastic model. When selecting this set make sure that it is for the kit recommended as these sets are made specifically for that kit.How-to:Preparing the masks: Masks should not be stre..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

..