Model Planes

..

The set contains the wing fuel tank parts for the arguably most famous Japanese WW2 fighter plane. It comes with the wing internal structure, cast resin tanks and access panels...

EADS GAF Telelens Recce Pod is a modern optical reconnaissance pod for mid and high flight levels and can be fitted to a model of West-European Panavia Tornado aircraft in service of German Luftwaffe.The set contains a decal sheet with stencils and a detailed guide showing their correct position...

EADS GAF Recce Pod is a modern optical reconnaissance pod for low and mid flight levels and can be fitted to a model of West-European Panavia Tornado of the German Luftwaffe. Full set of stencils is provided via a decal sheet and it comes with a thorough guide showing the stencils location...

AN/AVQ-26 Pave Tack pod specifically for 1/72 scale Hasegawa F-111 kits. There are two variations - parked configuration which includes a modified weapons bay and open weapons bay doors (HHS-72012A) and an "in-flight" configuration (HHS-72012B). Both versions include separate sensor head and cowl wh..

AN/AVQ-26 Pave Tack pod specifically for 1/72 scale Hasegawa F-111 kits. There are two variations - parked configuration which includes a modified weapons bay and open weapons bay doors (HHS-72012A) and an "in-flight" configuration (HHS-72012B). Both versions include separate sensor head and cowl wh..

..

..

..

The set consist:2x 1/32 resin machine gunPARTS ARE UNPAINTED..

Decal..

This set includes six (6) Mk-83 1000lb bombs with conical fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. Yours truly built ..

This set includes six (6) Mk-83 1000lb bombs with BSU-85 fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. Yours truly built s..

This set contains six (6) Mk-82 500lb bombs with thermal protective coating and BSU-86 retarded fins. Also included are six (6) each of the following:M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the aft end of the tail section..

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following:M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the aft end of the tail section to remove remnants of support ..

This set includes six Mk-82 / BLU-111/B bombs with BSU-33/B tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs.Accurately reproduced using personal measurements and photos of the real item. Parts come as seen in the photo, leaving minimal work for the modeler..

This set includes six (6) Mk-77 Fire Bombs.Light sanding to remove print support nibs is necessary on the aft end of the bomb..

This set includes twelve (12) Mk-76 25 lb Practice Bombs..

Set of four (4) 3D printed launchersIn February of 1964, the LAU-7A/A was introduced as a USAF version of the LAU-7/A that incorporated provisions for launching the TDU-11/B Target Rocket.The LAU-7A/A was used interchangeably with the Aero-3B on USAF F-4C/D/E Phantoms.The standoff adapters in ..

Set of four (4) 3D printed launchersIn January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6.Over the course of the next several years, numerous AAC's changed the designation of the launcher to B/A, A-7, B/A-1, as well as a few others. How..

Set of four (4) 3D printed launchersIn September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4.In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5.The LAU-7/A-5 was the launcher used when two VF-41 F-14..

Set of four (4) 3D printed launchersIn May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1.In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2.By 1972, the launcher was re-designated as the LAU-7/A-3 ..

Set of four (4) 3D printed launchersThe LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced.Our sincere thanks to Gerry Whiteside and Bill Arndt for their ass..

Set includes six (6) Mk-82/BLU-111 bombs with KMU-572 tail assemblies and nose strakes attached.Also included are six (6) DSU-33 proximity fuzes, six (6) MXU-735 solid nose plugs and six (6) Ogive nose plugs...