Model Planes

Set includes six (6) Mk-83/BLU-110 bombs with KMU-559 guidance kit and tail assemblies attached.Also included are six (6) each of the following : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs...

The FPU-6/A Oval Fuel Tank was developed for the F/A-18A/B Hornet in 1978 and used on the FSD aircraft, as well as a few fleet Hornets into the mid 1980's. It was phased out due to fatigue anomalies caused by the oval configuration.This set includes two hollow tanks that require assembly. Some li..

Set FL172-2001 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D.These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532 and aircraft upgraded to F/A-18A++ standard. The F/A-18A++ can be easily identified by..

Set FL172-2000 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and B.They not only correct the shape of the kit pylons, they provide details unmatched by the kit supplied parts. All pylons are 3D printed and require little clean up to remove the..

Vinyl..

This set includes three (3) ADM-141 TALD.The TALD was used with great success on SEAD missions in the opening stages of Operation Desert Storm in 1991. More than 100 were launched on the opening night of the war. This prompted the Iraqi air defense to activate many of its radars most of which wer..

This set includes two (2) XM158A1 Rocket Launchers.The Launcher was a seven-tube, reloadable, reusable, repairable 2.75" rocket launcher M158A1 was a variant of the M158 that included a modified hardback mount..

This is a two piece 3D printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter. Designed for the Kittyhawk kit.Simply glue the antenna to the top center of the base, paint and attach to your model. Parts come ready to install with no clean up required...

This set includes six (6) cluster bombs and come as shown in the photo.CAD by P. Haupt..

This set contains two (2) PMBR's in an 'unloaded' configuration. Due to the fragile nature of some of the components, the PMBR comes attached to the print supports. Use a fine tipped sprue cutter to carefully remove the supports from the parts.Used on the A-4 and TA-4 Skyhawk, OV-10 Bronco, P-3 Or..

This set contains two (2) PMBR's in a 'loaded' configuration, and twelve (12) Mk-76 practice bombs. Due to the fragile nature of some of the components, the PMBR comes attached to the print supports. Use a fine tipped sprue cutter to carefully remove the supports from the parts.Used on the A-4 and..

This set contains two (2) PMBR's in a 'loaded' configuration, and twelve (12) BDU-33 practice bombs. Due to the fragile nature of some of the components, the PMBR comes attached to the print supports. Use a fine tipped sprue cutter to carefully remove the supports from the parts.Used on the A-4 an..

Designed by Jarrad Bradley, this set includes four (4) Paveway IV warheads with guidance sections, four (4) Tail Sections, eight (8) seeker heads (four with covers), and sixteen (16) fins.Used on the UK Harrier II, Tornado, Typhoon, and F-35..

While we have an extensive line of ordnance, we also understand that some modelers are perfectly content using the bombs provided in the kits. In some cases, the fuzes included with them leave a lot to be desired and may not be what you'd like to depict.This set provides 24 MXU-735 Solid Nose Plu..

This set includes four (4) Mk-84 2000lb bombs with four (4) Conical fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-84 was used extensively by the USMC during Operation Desert Storm...

This set includes four (4) Mk-83 1000lb bombs, four (4) Conical fins and four (4) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. Yours truly..

This set includes four (4) MK-83 bombs, four (4) BSU-85 fins and four (4) each of the following :M904 Nose FuzeMk-43 TDD (target detecting device)MXU-735 nose plugThis bomb and fin configuration was used extensively by the United States Navy and Marine Corps during Operation Desert Storm...

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following :M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the aft end of the tail section to remove remnants of suppor..

This set contains six (6) Mk-82 500lb bombs with thermal protective coating and BSU-86 retarded fins. Also included are six (6) each of the following :M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the aft end of the tail secti..

3D ResinThis set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs.This Tail Fin is primarily used by the USAFTo allow for maximum detail on the aft end of the tail, this item is supported from ..

This set includes the following :Six (6) Thermally Protected Mk-82 500lb bombs with Conical FinsSix (6) M904 Nose FuzesSix (6) MXU-735 Solid Nose PlugsSix (6) Mk-43 TDD Proximity Fuzes (not shown)This bomb/fin configuration is correct for use from Vietnam to Desert StormBombs come as sho..

This set includes the following :Six (6) Mk-82 500lb bombs with Conical FinsSix (6) M904 Nose FuzesSix (6) Ogive Nose PlugsSix (6) MXU-735 Solid Nose PlugsSix (6) Mk-43 TDD Proximity Fuzes (not shown)This bomb/fin configuration is correct for use from Vietnam to Desert StormBombs come ..

This set includes six Thermally Protected Mk-82 / BLU-111/B bombs with BSU-33/B tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs.Accurately reproduced using personal measurements and photos of the real item. Parts come as seen in the photo, leaving minimal ..

This set includes six Mk-82 / BLU-111/B bombs with BSU-33/B tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs.Accurately reproduced using personal measurements and photos of the real item. Parts come as seen in the photo, leaving minimal work for the modeler..