Model Planes

This set includes eight (8) wing pylons, one (1) centerline pylons, and seven (7) BRU-36 ejector racks.3D printed and designed by Richard VanZandt using photos and measurements provided by FLD, Simon Oakes, Robert Foster and David Sweetman..

This set includes six (6) wing pylons, two (2) centerline pylons*, seven (7) BRU-36 ejector racks and two (2) adapters used when the LAU-7 missile launcher is attached to the outboard pylons.*Different centerline pylons are configured for use with the strakes or gun pack.3D printed and designed..

This set contains two accurate fuel tanks for the AV-8B Harrier and Harrier GR.5/7/9Each tank comprises 5 parts with keys to correctly place both the fore and aft sections.Designed by Richard VanZandt of Flight Line Resin..

..

3D ResinThis set includes eight (8) AOA Probes. Can be used on the F/A-18A-D, AV-8B, A-6E, EA-6B and several others...

3D ResinDesigned by Richard VanZandt, this set includes one (1) pod, comprised of three parts. Main body, alignment plug, and the tail section. Assembly required after minimal cleanup of parts...

This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.While limited in its use, the pod is still carried today by the US Marine Corps and is also used by ..

AN/ALQ-144, ready to paint and attach to your model.For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10..

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the stowed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Left Handed AN/AAQ-28 LITENING Pod in the stowed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Left Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

..

AIM-4D "Falcon" missiles with launch rails for F-4D/E (4 pcs) (3D Printed) (1/32)..

AIM-4D "Falcon" missiles (4 pcs) (F-89J, F-101B/F, CF-101B/F, F-102A, F-4(C,D,E,EJ), J-35F/J, J-37, AJ-37) (3D Printed) (1/32)..

AIM-26B (Rb.27) "Falcon" missiles (2 pcs) (F-106A, J-35F/J, Mirage III-S) (3D Printed) (1/32)..

AIM-26A "Falcon" missiles (2 pcs) (F-101B, F-102A, F-106A) (3D Printed) (1/32)..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with pylon adapters for the F-4B/N/J Phantom.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end of launche..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with pylon adapters for the F-4C/D/E Phantom.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end of launche..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with fuselage mounting adapters for the F-8E/J Crusader.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers and can be used on a variety of USN, USMC and USAF aircraft from the 50's and 60's.Each launcher is 3D printed and require only a light sanding to remove any remnant of the..

3D ResinThis set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station...

3D ResinThis set includes four (4) ADU-830/A Adapters currently being used by the AV-8B II Plus to allow the carriage of AIM-120 with LAU-127 on stations 2 and/or 6, as well as AIM-9 with LAU-7 on those two stations...