Model Planes
Discontinued
Future Release
Brand: Flying Leathernecks
SKU: FL32-2075
This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.While limited in its use, the pod is still carried today by the US Marine Corps and is also used by ..
US$0.00
Future Release
Brand: Flying Leathernecks
SKU: FL32-2004
AN/ALQ-144, ready to paint and attach to your model.For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10..
US$0.00
Future Release
Brand: Flying Leathernecks
SKU: FL32-2033
This set includes 6 buckets that can be used to replace those found in kits that may be under detailed...
US$0.00
Future Release
Brand: Flying Leathernecks
SKU: FL32-2032
This set includes six (6) buckets that can be used in a diorama setting (ordnance loading evolution) or to replace kit parts...
US$0.00
Future Release
Out Of Stock
Brand: HGW
SKU: HGW-632017
HGW's masking patterns, designed for Wingnut Wings kit, easy solution, 1/32 scaleHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once pla..
US$6.00
39 % OFF
US$3.62
Out Of Stock
Brand: HGW
SKU: HGW-132097
accessory suitable for AMC DH.2 by Wingnut Wings,photo etched parts developed in cooperation with Eduard company,1/32 scale..
US$12.40
18 % OFF
US$10.05
Out Of Stock
Brand: Noys Miniatures
SKU: NM3204
A single 1/32 sheet (approx. dimensions: Length: 59.3 cm; Width: 40 cm)...
US$42.18
17 % OFF
US$34.69
Future Release
Brand: Archer Transfers
SKU: AR88142
RESIN ON CLEAR DECAL FILM
Sheet of aircraft rivets .014" (.34 mm) in diameter in three different spacings to match the spacings on AR88143 and AR88144.
Includes a transparent guide to match sheet layout to aid in selecting the appropriate diameter for your model. Comes with instructions.SCALE NOTE..
US$0.00
Future Release
Future Release
Future Release
Brand: Reskit
SKU: RS32-0490
AIM-4D "Falcon" missiles with launch rails for F-4D/E (4 pcs) (3D Printed) (1/32)..
US$0.00
Future Release
Brand: Reskit
SKU: RS32-0431
AIM-4D "Falcon" missiles (4 pcs) (F-89J, F-101B/F, CF-101B/F, F-102A, F-4(C,D,E,EJ), J-35F/J, J-37, AJ-37) (3D Printed) (1/32)..
US$0.00
Future Release
Brand: Reskit
SKU: RS32-0503
AIM-26B (Rb.27) "Falcon" missiles (2 pcs) (F-106A, J-35F/J, Mirage III-S) (3D Printed) (1/32)..
US$0.00
Future Release
Brand: Reskit
SKU: RS32-0489
AIM-26A "Falcon" missiles (2 pcs) (F-101B, F-102A, F-106A) (3D Printed) (1/32)..
US$0.00
Out Of Stock
Future Release
Brand: Reskit
SKU: RSU32-0176
AH-1G "Cobra" main rotor with dust and debris deflector (sand shields) late version for ICM kit (3D Printed) (1/32)..
US$0.00
Future Release
Brand: Reskit
SKU: RSU32-0175
AH-1G "Cobra" main rotor with dust and debris deflector (sand shields) early version for ICM kit (3D Printed) (1/32)..
US$0.00
Future Release
Out Of Stock
Brand: Wolfpack Design
SKU: WP32009
Features: - AGM-154 JSOW set for 1/32 F/A-18, F-16- Total 16 resin parts- A5 color printing manual included..
US$21.41
17 % OFF
US$17.63
Future Release
Brand: Flying Leathernecks
SKU: FL32-2028
The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with pylon adapters for the F-4B/N/J Phantom.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end of launche..
US$0.00
Future Release
Brand: Flying Leathernecks
SKU: FL32-2029
The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with pylon adapters for the F-4C/D/E Phantom.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end of launche..
US$0.00
Future Release
Brand: Flying Leathernecks
SKU: FL32-2027
The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with fuselage mounting adapters for the F-8E/J Crusader.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end..
US$0.00