Model Planes

Set includes four Mk-82/BLU-111 bombs with rough ablative coating, four KMU-572 kits, which include the tail assemblies and nose strake as separate pieces.Also included are four (4) each : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs...

Set includes four slick Mk-82/BLU-111 bombs, four KMU-572 kits, which include the tail assemblies and nose strake as separate pieces.Also included are four (4) each : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs...

Designed to be used with the resin GBU-32 1000lb JDAM produced by Wolfpack Design..

Set includes two Thermally Protected Mk-83 / BLU-110A/B bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces.Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs...

Set includes two Mk-83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces.Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs...

3D ResinThis set includes four (4) Thermally Protected GBU-12 laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fi..

3D ResinThis set includes four (4) GBU-12 laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fins in the guidance s..

3D ResinThis set includes two (2) fuel tanks, made up of four (4) parts each. The nose section, main body, tail cone and a key to line up the nose and main body.Lightly sand the aft surface of the main body to remove the print support nibs, insert key, then attach nose section. Light sanding of th..

3D ResinThis one piece boarding ladder is designed to fit both the Meng and Hasegawa Super Hornet / Growler kits. May also work with the Revell and Italeri kits, with possible modifications to kit needed.Designed by Richard VanZandt of Flightline Resin, item comes as shown in the photo...

Waterslide Decals printed by Microscale (Insert printed by Cartograf).8.5 x 11.0 inch sheet..

Waterslide Decals printed by Microscale.8.5 x 11.0 inch sheet..

This set contains all of the parts necessary to convert the Academy 1/32 F/A-18D into an ATARS Configured aircraft. The Advanced Tactical Airborne Reconnaissance System (ATARS) had its combat debut in 1999 with VMFA(AW)-332 during Operation Allied Force and continued to see service throughout Operat..

Waterslide Decals printed by Microscale.8.5 x 11.0 inch sheet..

Vinyl Mask..

Waterslide Decals printed by Microscale (Insert printed by Cartograf).8.5 x 11.0 inch sheet..

This set includes two main wheels and two nose wheels for the Academy F/A-18 Hornet.CAD by Richard VanZandt..

This is a simple replacement for the slightly too thick kit supplied HUD's. Cut in clear .007 styrene, simply cut HUD from runner and apply to kit HUD frame, or any aftermarket photo-etch frame. Enough pieces for six aircraft are included...

All NEW design HUD assembly for use with the Academy kit parts. Complete unit is 3D printed and comes ready to install after a small modification to the kit parts.Includes die cut 'glass' in .005 clear styrene..

This set includes correctly shaped and sized LEX Fence parts applicable to all 1/32 F/A-18A/B/C/D Hornet kits...

3D ResinThis set includes a total of four (4) tail stiffening plates commonly found on F/A-18A and F/A-18A+ Hornets. The four plates will complete two (2) models.3D printed, the plates have all of the rivet and screw fasteners visible. Simply remove from the support, sand the small attachment poin..

All NEW design HUD assembly for use with the Academy kit parts. Complete unit is 3D printed and comes ready to install after a small modification to the kit parts.**This HUD assembly is also appropriate for almost all F/A-18A+ and A++, E/F and EA-18G aircraft.A+ aircraft can easily be identified..

3D ResinThis set includes six (6) GPS Antenna found on the F/A-18 Hornet, EA-6B Prowler, CH-46E and several other aircraft.3D printed, parts come as shown and are very easily removed from the supports using sharp sprue cutters or X-Acto type blade. Use Super Glue (CA) to attach to kit...

Cut in holographic vinyl to replicate the windows on the seeker head of the pod. Simply peel and stick after pod has been painted, decaled and weathered. Enough pieces for six pods are included.Also included are pieces to replicate the lens of the LST/SCAM PodFor the Academy F/A-18 kits..

Vinyl Mask..