All Products

Nicely detailed resin parts for the Cyrano IV radar (made using 3D technology) with its pressurised casing on, this set is meant to enhance your new Special Hobby Mirage F.1 kit.It will be very easy to use this set as its resin parts come as direct replacement of the kit's nose plastic parts...

Detailed cast resin parts showing the last stage of the engine turbine, afterburner unit duct and the engine nozzle for the new Special Hobby Mirage F.1 model. A PE-fret comes also with this set. The resin parts replace simply the plastic ones making the assembly quite uncomplicated...

Finely detailed resin replica of the largest fuel tank to be ever used under the Mirage F.1 jets and in service mainly with the CR and CT versions...

The kit brings two frames of plastic parts, two resin fuselage halves specific to the Re.2003 version and several other resin parts as the interior, engine and some others. Furthermore, there are also photo -etched parts bringing extra detail to the model, vacuum-formed canopy and a decal sheet cove..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

New wheels that offer more details and have tyres with sharply rendered tread pattern. To be used with your Meillerwagen A4/V2 missiles transporter...

The set brings you a nicely elaborated MB Mk.9 hot seat along with its seat belts for a model of a British multipurpose aircraft...

The Matra 155 pod for eighteen 68mm unguided rockets have been used with large number of military aircraft, both fixed-wing and helicopters, mainly of British, French or Israeli origin in service with many armies of the world. The Matra pods were carried under different types such as were for exampl..

A resin cast hot seat, the life-size pattern of which was used in a wide variety of airframes, British ones as were the Buccaneer, Italian as the MB-326 or Fiat G.91 and even French or Israeli ones as the whole family of the Mirage III / Kfir / Dagger jets, the Super Etendard or even the Argentine P..

Full resin kit of the British MB-2 fighter prototype. Except of the resin parts including variation of the tail planes the kit contains vacu-formed canopy and decals. MB-2 featured novel shapes, sophisticated design and production technologies. The aircraft was designed according to the F5/34 specif..

Two crew figures in this set portray a commander and a gunner of a Marder tank destroyer. Made to fit the Special Armour line Marder II kit made by Special Hobby. In fact, these two can be used with any German WW2 tank destroyers or even another type of military vehicles...

This is an all-resin cast construction kit of the aircraft tug vehicle that is currently operated by the German Bundeswehr. The kit is 3D designed and along the resin parts, it contains also clear styrene injected parts portraying the cabin windows, a decal sheet and full colour instructions...

High pressure air starter unit used for starting an aircraft jet engine by means of high velocity air generated by a small turbine inside the cart. The MA-1A cart was in service since the 1950s and and was used to start number of US jet engine aircraft such as the T-33A, T-38 and many others, but co..

Full resin kit of an amphibious tracked vehicle. Although initially designed as a combat and reconnaissance vehicle, it was mainly used to transport troops and cargo to other vehicles in the obstructed areas. Thanks to its low weight and wide belts Its capabilities were phenomenal. It was used in Eu..

The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot's seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the ma..

This set contains all new cockpit parts for a model of arguably the best Japanese WW2 fighter plane. The detailed resin parts include a new cockpit floor, side consoles, pilot's seat, cockpit bulkheads, control column, rudder pedals and instrument panel. The set also offers a piece of acetate film w..

Detailed resin cockpit (with a floor, control column, pilot's seat with belts and an instrument panel) for the Special Hobby's model of the iconic Japanese Army Air Force WW2 fighter aeroplane. The instrument faces are pre-printed on a piece of clear film...

This set consists of the ailerons, tailplanes, elevators and the rudder and has been designed for the Special Hobby's model of the IJAAF WW2 fighter plane...

Auxiliary take off rocket engine pods used by the Luftwaffe of their Junkers Ju 88 A-2 bombers and several other bombers and transport aircraft...

..

This set contains a resin pilot's seat with belts which easily replaces the original kit's part and offer higher levels of detail. Designed to fit Hasegawa's 1/72 Mitsubishi J2M3 Raiden (Jack) model..

This interior set fits the Hasegawa kit of the Mitsubishi J2M3 Raiden (Jack) fighter plane. The set offers high levels of detail on the cockpit sidewalls, floor, fuselage bulkheads, pilot's seat with belts, instrument panel and the fuel tank located forward of the panel, antenna mast mounted on the ..