All Products

Replace the kit main wheels with these superb resin wheels that feature accurate staggered block tread pattern and detailed hubs. Real P-51 wheels have see-through hubs, and you can easily open the slots and holes on these wheels by cutting away the thin flash, resulting in a very prototypical look...

This set contains a pair of detailed resin mainwheels with crisply molded, seamless and accurate diamond tread pattern. You can choose between plain, covered or 6 slot hubs. The inner wheel hub detail is visible through the slots of the outer wheel hub, bringing a whole new level of detail. Makes a ..

This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for the Trumpeter P-40B kits, replacing the vinyl/plastic wheels in the kit...

Accurate, detailed WMA metal seat with molded-in belts and backpad, new armored seat bulkhead for Tamiya, ZM, Dragon, other P-51D kits. Decals are included for the seat backpad and the seatbelt stitching...

This sheet contains a complete set of external stencil markings for the DH Mosquito family. Included are alternate stencils in red aircraft with black undersides. our stencils are sharper, cleaner, thinner replacements for the kit decals, with an absolute minimum of clear carrier film. Designed by ..

This sheet contains new, sharply printed gauge faces to replace the kit decal instruments, plus all of the many other stencils and placards found in the Mosquito cockpit. A simple and fun way to add a lot of visual interest to your Mosquito cockpit. Designed by Chris Busbridge. Printed by Cartograf..

Coloured photo-etched set..

..

This set contains one detailed, accurately shaped resin oil cooler fairing and separate exit flap that is a drop fit replacement for the kit fairing. It is too slab sided on Revell's Bf 109G-6. Much study of photos was made in the preparation of this new set. A quick and easy drop fit replacement th..

This set contains a new seamless resin supercharger intake accurate for the Bf 109G-5 through the G-14, separate hollow cooling scoops and accurate and detailed exhausts with recessed openings to replace the kit items in the Revell G-6. Filling the seams inside the intake is a tricky and time consum..

This set contains a new resin prop and spinner to replace the kit items in the Revell kit or any 109 from the F-4 through the G-14. Barracuda resin spinner is very accurate in shape and detail. The misshapen kit blades are replaced with very accurate resin versions which will make a big improvement ..

..

This set contains one accurate and very strong lost wax cast brass tall tail strut and two styles of detailed tailwheels in resin, both smooth and radial tread tire versions. This brass strut will not bend over time like white metal can. Can be fit to all late model Bf 109G/K kits in 1:32 scale. A q..

This set consists of a pair of thoroughly researched and accurate underwing gunpods (kanoneboots) featuring turned brass barrels from the craftsman at Master Model in Poland. These pods are quick and easy to clean-up and install. The barrels can be added at the end of the build to eliminate the poss..

..

..

..

..

This set is designed to correct the nose, radiator, prop and spinner on the otherwise stunning Special Hobby Tempest V. The problem with the nose is that the spinner baseplate diameter is too big by about 2 inches. This throws out the taper of the forward cowling. The radiator opening is also too bi..

Consists of accurate resin mainwheels with ribbed tires, solid wheel hubs and detailed, readable tire logo and tire data. A simple to install upgrade for your Hasegawa or Revell Fw 190A/F and all Dora series kits. Designed by Gunnar Jansson...

Contains a new, accurate engine compressor face clearly visible through the kit intakes and new engine rear. The kit part does not capture the look well. Also included are a new turbine face and complete jet exhaust pipe with detailed nozzle. All parts are 3D printed. Designed for all Trumpeter A-4 ..

Contains a pair of detailed 3D printed 20mm Colt cannon barrels with muzzle brakes compete with accurately placed and sized vent holes. Barrels are deeply drilled out. For most A-4C and later Skyhawk kits, with the exception of IAF aircraft, which are fitted with different model cannon. A very simpl..

Coloured photo-etched set..

Coloured photo-etched set..