All Products

..

This set offers the modeller an interesting selection of pigment colours that will prove an special finish for fantasy and metallic parts in any vehicle, or figure.Included are: ABTPF607 Metallic Silver. ABTPF611 Stainless Alloy. ABTPF612 Brass. ABTPF613 Cooper...

It includes two springs of 15cm in length and 1mm diameter. 2 units per reference. Perfect for simulating pipes and hoses on scale models. To simulate the shape it is recommended to use a wire inside..

It includes two springs of 15cm in length and 1.5mm diameter. 2 units per reference. Perfect for simulating pipes and hoses on scale models. To simulate the shape it is recommended to use a wire inside..

..

These miniature vegetation products are perfect to complement your scenes, figure bases and any type of diorama in which you need an extra touch of realism. They are self-adhesive and therefore very easy to use: simply remove the tufts of grass using a pair of tweezers, and place them on the surface..

RC272 RLM 65 (1941), RC276 RLM 72, RC277 RLM 73, RC327 RLM 83..

RC313 AMT-1 Light Brown, RC315 AMT-4 Green, RC316 AMT-7 Light Blue, RC318 AMT-12 Dark Grey..

RC225 Dark Tan FS 30219, RC226 Sand FS 33531, RC232 Pale Green FS 34227, RC241 Duck Egg Blue FS 35622..

RC208 Grey Blue RAL 5008, RC217 Silk Grey RAL 7044, RC218 Olive Brown RAL 8008, RC219 MNO 2036 Smalt Khaki Avion..

AK Interactive Waterborne polymer primer is available in US green color that is perfect for painting US vehicles. Its superb adhesion qualities combined with a matt-satin fi nish make our primer the perfect choice for preparing models for painting. Only a light layer of primer is required for full, ..

A water based polymeric rust primer colour, which is incredibly versatile and perfect to be used as the basis for any colour. Its adhesion capability, coupled with its matte-satin finish, makes it perfect for preparing any model for painting. As well as its high covering power, it only leaves a thin..

The new set US NAVY CAMOUFLAGES 2, has been developed to complement the previous US NAVY CAMOUFLAGES. With this new acrylic set we hand over the naval modeller a powerful tool which will allow you to paint all of the US Navy schemes during World War II, as it can be the "Early" as the "Dazle" and "L..

A special set that included 14 colors and a 30 mm scale figure of Yedharo Models. The tones are selected to paint the particular figure but also to increase our range of colors for painting any kind of figures. The 3Gen range is currently the most valued paints by painters all over the world. The fo..

Contains 8 Model Colour of 17 ml./0.57 fl.oz.Content: 70,914 Green Ocher 70.879 Green Brown 70,880 Khaki Gray 70,988 Khaki Brown 70,890 Refractory Green 70.887 US Olive Green 70.982 Red Brown 70.906 Pale Blue..

This set contains the four colours that are indispensable for painting the cockpits and other inner surfaces of German aircraft from the World War Two period. The RLM 02 was also used as camouflage colour. Included are two different variants of each colour, based on the samples from the original iss..

This set contains the four colours that are essential for painting models of vehicles used by the German Afrika Korps. Included are RAL 7008 Graugrun (Green Grey) and RAL 8000 Gelbbraun (Yellow Brown) colours used in the 1941-1942 period, and RAL 7027 Grau (Grey) and RAL 8020 Braun (Brown) colours u..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..