All Products

- Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.- The straps can be set to whatever length you need, just as on the real thing.- The set in..

Scale 1/32. This is the standard seat harness used on all British-made / RAF aircraft until the end of WW2 and even after. Suitable for all wartime Spitfires/Seafires, Hurricanes, Mosquitoes, Typhoons, Tempests, etc.No painting needed, just remove the pre-cut belts from the backing paper, glue the d..

Scale 1/32. "Sutton A" Seat Harness. Designed by Oliver Sutton in 1917, this was the "Jack-of-all-trades" harness used on all British-made / RAF aircraft from 1918 until the beginning of WW2 (and even after). Suitable for all interwar British aircraft, especially biplanes. These harnesses saw acti..

1/32 Scale RulerYou can use this tool to measure scale 1/32 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

This is a set of turnbuckles for rigging biplane models in scale 1/32. These are suitable for WW1 German and French aircraft as well as some British aircraft fitted with round cables (rather than the late-war airfoil wires). The package contains 80 rigging turnbuckles in photo-etched brass. By foldi..

This is a very large A4 (printer-sheet size) photo-etched brass base used to simulate the PSP planks used on airfields. Suitable for scale 1/32...

Suitable for display bases.Perforated Steel Planking (or Marsden Matting) was extensively used by the United States in rapid building of landing strips / aircraft pens. These were used in all theatres of operations, not only in World War 2, but also in Korea and Vietnam. These are still in use in so..

This is a detail set to improve the new Revell scale 1/32 P-51D-5 model kit. The set contains a pair of bomb racks with separate sway braces in photo-etched stainless steel. These represent the type of bomb rack used only on the P-51D-5. These parts add extra detail and replace the kit parts that su..

This is a detail set to improve the new Revell scale 1/32 P-51D model kit. The set contains a set of separate undercarriage doors. These parts add extra detail and replace the kit part that is a single piece. which needs to be cut into four separate components and may suffer from sink marks...

This is a photoetched set that can add extra detail to your Messerschmitt Bf109 G or K model.Suitable for any 1/32 kit of the Bf109G/K such as Hasegawa / Revell / Pro Modeller / 21st Century Models.NOTE: The Hasegawa Bf109G10 and Bf109K4 kits have a slight flaw in the spine just aft of the canopy (..

This is a photo-etched set that can add extra detail to your Messerschmitt Bf109G model. Suitable for the 1/32 Hasegawa / Revell / Pro Modeller kits of the Bf109G.The canopy can be posed open or closed. The sliding side panels can be posed open or closed.The set contains one photoetched sheet, clear..

This is a photoetched set that can add extra detail to your Messerschmitt Bf109F model. Suitable for the new Hasegawa Bf109F kit. Also suitable for the 1/32 21st Century kit of the Bf109F or a Hasegawa / Revell / Pro Modeller Bf109G kit backdated to an F-type. This canopy is also suitable for Bf109E..

This is a complete set of radiators to replace the parts provided in the Cyber-Hobby (Dragon Wing Tech) 1/32 Messerschmitt Bf 109 E kits.The set contains both oil and coolant radiators. The radiator parts are made of stainless steel. The radiators can be sprayed with matt varnish to provide a very r..

Standard "beige" seatbelts (hemp/cotton mix).Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet o..

1/32 Luftwaffe pedals.This photo-etched sheet contains three types of German rudder pedals that cover the entire range of pedals used on German aircraft, such as Bf109 (early and late) , Bf110 (early and late), Me163, Ju88, etc.The set also includes two types of optional treadplate panels to modify ..

Designed for the scale 1/32 Zoukei Mura kits of the Focke Wulf Ta 1F2 H-0 and Ta 152 H-1. The set contains complete instrument panels, side consoles, rudder pedals, seat back armour, head armour and other parts to detail the cockpit supplied in the plastic kit. The instrument panels were designed to..

Set comes with unpainted resin parts...

1/32 Sutton QS / QL / QP Seat Harness. This is the late-war seat harness used on all British-made / RAF aircraft from the summer of 1944 until the introduction of ejection seats. Suitable for all late-war and post-war British planes fitted with bubble canopies such as Spitfire, Typhoon, Tempest, Vam..

1/32 British Flat Rigging Wire - 9/32"BSFSuitable for all RFC, RNAS and RAF aircraft, as well as British export aircraft.This is the 9/32"BSF flat wire used on british biplanes.The wires are made from stainless steel. The dimensions of these wires are in accordance with British Standard Specificatio..

1/32 British Flat Rigging Wire - 1/4"BSFSuitable for all RFC, RNAS and RAF aircraft as well as British export aircraft.This is the 1/4"BSF flat wire used on British biplanes.The wires are made from stainless steel. The dimensions of these wires are in accordance with British Standard Specifications ..

(Type: model figures) This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.This is a scale 1/32 figure of a Romanian pilot in 1944/1945. This resin figure depicts a Romanian pilot wearing a Romanian uniform ..

Scale 1/24. This is the standard seat harness used on all British-made / RAF aircraft until the end of WW2 and even after. Suitable for all wartime Spitfires/Seafires, Hurricanes, Mosquitoes, Typhoons, Tempests, etc.No painting needed, no cutting needed, just remove the pre-cut belts from the backin..

This is a complete set of radiators intended to improve the parts provided in the Airfix1/24 Hawker Typhoon kit.The parts feature the correct "honeycomb" look of the Typhoon radiator.No folding and no modification of kit parts needed. The parts are etched in stainless steel. The radiators can be spr..

1/24 German Standard "beige" seatbelts (hemp/cotton mix).- Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.- The straps can be set to whatever length you need, just as on the real thing.- The set in..