All Products

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.This model recreates the second-generation Montero, Mitsubishi's long-selling 4WD SUV. The car depicted by this kit had a dedicated 3-liter V6 engine an..

Applicationbonding with wood glue or super glue.Size : all scales..

Features4.5 mm long khaki grass fibers to be used immediately. Can be dyed with a brush or airbrush. Sticking with wood glue or super glue.Scale : 1/87 - 1/35 Size : 18mm - 120mmAlso for wargaming..

Characteristics:beige grass fibres 2 mm for direct use.Application:to made wild grass.Already in beige colour, can be coloured in more tints by airbrush or brush.Stick with super glue.Suitable for 1/160 to 1/35 scales and 12mm to 60mm models. Also can be used for wargaming...

Characteristics:beige grass fibres 1 mm for direct use.Application:to made wild grass.Already in beige colour, can be coloured in more tints by airbrush or brush.Stick with super glue.Suitable for 1/160 to 1/35 scales and 12mm to 60mm models. Also can be used for wargaming...

Contents: 2 Model Wash, Pigment Blinder and 3 Model Color in a 8 ml. bottle and 10 ml. pigment bottle. Includes step by step and color chart.Weathering for Yellow and Grey Vehicles: This Weathering Painting System, presented in collaboration with Jos? Brito, consists in the application of a series o..

..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.Product Features:- New tooling fascine carrier frame with delicate wooden texture (lumber bundles not included)- Steel wire rope, U-shaped shackles, and..

Seven different sizes and styles. 8cm - 35 cm.Arabic numerals #1. BLACK 0-9.How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set th..

The trailing edge of the rudder has been thinned down and sharpened. The rudder has also been separated from the fin. Rudder servo housing and pitot position have been adjusted and refined...

The set can be used to replace the original parts...

The finished result is shown in the photo(s). * Please note: 1. The armoured vehicle in the photo(s) is just for display and NOT included in this set. 2. The finished details on photo(s) may also be contributed by other upgrade sets from Voyager, please check the photos for more information (written..

This set is for for DRAGON 6511 / TAMIYA 35190. The finished result is shown in the photo(s).* Please note: 1. The armoured vehicle in the photo(s) is just for display and NOT included in this set. 2. The finished details on photo(s) may also be contributed by other upgrade sets from Voyag..

NOTE: You will need Voyager set PEA295 and VBS0141 to achieve the result shown in the 2nd and 3rd photos...

Brand NewFor 1/35 Dragon Sd.Kfz.184 Ferdinand kitIncluding photo-etched sheets, copper tubes and cable, steel wire, ABS rod, clear plastic sheet, resin parts and metal parts..

Brand New For 1/35 Tamiya 35209 Including photo-etched sheets, copper tube and cable, steel wire, ABS rods, resin parts and metal parts..

Brand NewFor 1/35th WWII British Armoured Car Staghound Mk.I - TAMIYA kit 89770..

Brand NewFor the 1/35 IDF Sho't Centurion Mk.5, Mk.5/1 1967 (AFV Club #35159)Including 9 etched frets of different sizes and thickness, 8 parts in light cream resin, two short lengths of plastic rod and 12 brass smoke grenade tubesThe metal barrel shown in the illustrations is NOT included in this s..

Brand New For the 1/35 Dragon sFH-18 150mm Howitzer w/Limber (#6392) Including 2 large and 4 smaller etched frets, 2 brass 150mm HE rounds, 2 brass charge cases, 4 resin parts and lengths of 0.5mm and 1mm plastic rod, a length of 0.3mm steel wire and metal chain..

Brand NewFor 1/35 Dragon kits 6164/6299Including eight (8) photo-etched sheets, steel wire (0.3mm x 8cm) x1, ABS rod (1mm x 5cm) x1, ABS rod (0.5mm x 5cm) x3, and metal partsArmour skirts / AA armour / cleaning rod bin are NOT included in this set..

Brand NewFor 1/35 Dragon King Tiger kitsIncluding photo-etched sheets, copper cables, steel wire, ABS rods, resin parts and metal part..

..

Brand NewFor all 1/35 armour kits..

Brand New *The sample armour kit shown on illustrations is upgraded by NOT ONLY this set (PE35321) BUT ALSO other Voyager sets (PEA095, PEA096, PEA097, PEA116 & TE031)...