Matho 35134 1/35 Banana Boxes (14 boxes in 3 different designs)

Contains 1 A5 sized sheet with a total of 14 boxes (3 different designs). For each box a separated top part and bottom part is available.

Features:
Printed on slightly thickened paper to give you a very realistic appearance Inside of the boxes is printed as well with brown cardboard texture, so the boxes can be displayed opened as well the necessary holes are indicated in the print (see tips below)

Tips:
Cut out with a really sharp (preferable new) knife and steel ruler
To cut out the small round holes (the correct positions are indicated), simply use a scribe needle and press it down until you get a nice round hole of the correct size, then remove the excess paper on the other side with a sharp knife
To cut the longer holes, do exactly the same with a scribe needle on the left and right end of the hole, then use a sharp knife to cut out the remaining part
For easier bending, it is recommended that you use a knife + steel ruler to very gently move over the bending lines. Be sure NOT to press too hard as these lines should not be cut. This will result in nice and sharp bends.
For colored boxes you can slightly paint the edges in the matching color (once you are finished with gluing the box together) to remove the white paper color

Note: copyright markings are not present on the actual product.